top of page
Search

Granite Countertop Cost in Houston (2026): Installed Prices by Square Foot

4 days ago
7 min read
Granite Countertop Cost in Houston

Common-level granite countertops in Houston cost about 45–75 per sq. ft. installed in 2026. Higher-level granite can run 80–130 per sq. ft. installed. At those rates, 40 sq. ft. of countertop comes to 1,800–3,000 for common granite or 3,200–5,200 for higher-level stone. These are Houston-area market estimates.  Your final price depends on the slab, the layout, and what your installer includes. If you’re replacing existing counters, ask for the cost of removal, disposal, and sink reconnection before comparing bids. Those line items can change which quote gives you the better deal.

How Much Do Granite Countertops Cost per Square Foot in Houston?

A per-square-foot rate is useful once you know what it covers. Published Houston benchmarks vary by granite grade, edge profile, and the work included.

  • SlabWise lists 40–65 per sq. ft. installed for Level 1–2 granite and 65–100 per sq. ft. installed for Level 3–5. Its estimates include a standard eased edge and up to three cutouts. 

  • H&E Stone uses 60–130 per sq. ft. installed as its granite estimator base range. Edge upgrades can change the estimate. Existing countertop demolition, plumbing disconnects, and tile backsplash are excluded. 

Use these ranges to set a budget. When you compare actual bids, ask each installer to price the same material, edge, cutouts, and removal scope. A low advertised rate may apply to a limited stone selection or cover installation labor alone.  If you’re deciding between colors and patterns, browse 3A’s Granite Countertops collection. It includes options such as River White, Baltic Brown, Blue Pearl, and Black Wave. Ask which slabs are available for your project and how each selection would change the estimate.

How Much Does Granite Cost for Your Kitchen Size?

Use your countertop area to estimate the job. Kitchen floor area measures the room. Countertop area measures the surfaces the fabricator needs to cut and install, including any island or peninsula you plan to cover.

Countertop area

Common granite at 45–75 per sq. ft. installed

Higher-level granite at 80–130 per sq. ft. installed

30 sq. ft.

1,350–2,250

2,400–3,900

40 sq. ft.

1,800–3,000

3,200–5,200

50 sq. ft.

2,250–3,750

4,000–6,500

60 sq. ft.

2,700–4,500

4,800–7,800

Houston-area planning estimates. Request a project-specific quote from 3A.

These estimates multiply finished countertop area by the RBL Stone rates cited in the opening. They are budgeting examples. A second slab, a decorative edge, or work outside the installer’s standard scope can change your total. 

How to measure your countertop for a budget estimate

Measure each section in inches. Multiply its length by its depth, then divide by 144 to get square feet. For an L-shaped kitchen, split the counter into rectangles and count the shared corner once. Measure the island separately, including any planned overhang. Mark the sink and cooktop on your sketch so the installer can quote the cutouts. For example, a 120 × 25.5-inch run is about 21.3 square feet, and a 72 × 36-inch island adds 18 square feet. Together, they give you about 39.3 square feet for a preliminary estimate. If you want a waterfall island, show the vertical panels separately. They add stone and may require mitered edges and pattern matching. For a project that also includes new cabinets, see the 

What Makes One Granite Countertop Quote More Expensive Than Another?

Granite Countertop Quote More Expensive Than Another

Granite level affects the slab price. Level 1 granite often includes widely available colors and patterns. Premium slabs can cost more because of their rarity, pattern, or availability. Since suppliers set their own levels, ask for the actual stone name, slab size, and finish when comparing a Level 1 quote with a Level 2 or Level 3 quote. 

Thickness and finish affect the job scope. When comparing 2 cm and 3 cm granite, ask what each quote includes for the finished edge, decking, and support. If you’re considering a polished or honed surface, get both options priced for the same stone and layout where available. That gives you a clearer comparison than a generic thickness or finish surcharge. Slab yield affects how much stone you buy. A wide island, an L-shaped layout, or a pattern you want to align across seams can limit how the fabricator arranges pieces on a slab. Ask the installer how many slabs the job requires, where seams will fall, and whether the estimate bills by finished countertop area or by the slabs purchased. 

Illustrative Example: Two 40-Square-Foot Kitchen Quotes

Illustrative layout

What the installer needs to price

Kitchen A: Straight run, one sink, and a standard edge

Check whether the slab accommodates the full run and whether the quote includes the sink cutout and finished ends.

Kitchen B: L-shaped layout, one sink, a separate cooktop, and more exposed edge

Check seam placement, the extra cutout, total finished edge length, and whether the pieces fit on the same number of slabs.

Both kitchens start with the same square-foot budget. Kitchen B can end up costing more if the layout requires extra fabrication or another slab. Ask for those differences in writing so you can see which part of the bid changed.

Prefab Granite, Custom Slabs, and Remnants: Which Costs Less?

The most affordable granite countertop is usually the one that fits your layout with the least extra material and fabrication. Ask installers to price the option that fits your project first.

Option

Best fit

What to confirm before ordering

Prefabricated granite

Straight, standard-depth kitchen runs

Piece dimensions, finished edges, available colors, seam locations, and whether cutting and installation are included.

Custom granite slab

Irregular layouts, wide islands, custom overhangs, or a kitchen where you want the pattern to flow between pieces

Slab count, cutting layout, seam placement, edge profile, and billing basis.

Granite remnant

Bathroom vanity tops or other small surfaces

Usable piece size, matching backsplash material if needed, sink cutout, and minimum fabrication or installation charge.

If you’re pricing a granite bathroom vanity top, send the vanity width, depth, sink type, and backsplash dimensions. A remnant can reduce material cost when the piece fits. Check the finished installed price, because a minimum charge can have a large effect on a small job. For the cabinet, sink, and plumbing portions of the project, see the 

What Does a Granite Countertop Installation Quote Include?

Start by checking whether you have a stone-only price, an installation-only rate, or an installed quote. Stone-only pricing covers the material. An installation-only rate can exclude the slab, fabrication items, and other supplies. An installed quote typically combines material and labor, with inclusions that vary by provider. One Houston installer, for example, lists labor pricing separately and excludes material, decking, sealer, and cutouts from that advertised rate. 

Ask for these items on the written estimate before comparing totals.

Quote item

What to check

Granite and fabrication

Stone name, thickness, finish, slab count, templating, and fabrication.

Edges and cutouts

Standard edge, any decorative or mitered edge, finished edge length, sink cutout, faucet holes, and cooktop opening.

Removal and disposal

Who removes and hauls away old countertops, and whether the existing backsplash stays.

Sink and plumbing

Who supplies and mounts the sink, disconnects the old plumbing, and reconnects the faucet, drain, and disposal.

Cabinet and island support

Whether cabinets need leveling, decking, reinforcement, or brackets for an overhang.

Delivery and finish work

Delivery, installation, initial sealing, cleanup, and any minimum trip or job charge.

Backsplash

Whether a short granite backsplash or full-height backsplash is included, and how it’s priced.

Pay attention to how extras are billed. A decorative edge or backsplash may be priced by the linear foot, a cooktop opening by the cutout, and removal or delivery as a flat fee. When two bids differ, compare the total after including the same work in both. If one installer leaves plumbing to another trade, get that price before committing. Once you’ve agreed on scope, the countertop installation timeline explains what happens from measurement through installation.

Is Granite Cheaper Than Quartz in Houston?

Is Granite Cheaper Than Quartz in Houston?

Common granite can cost less than some quartz options, while higher-level granite can cost more than standard quartz. One Houston-area guide puts installed granite at roughly 55–95 per sq. ft. installed and engineered quartz at 65–110 per sq. ft. installed, with templating, fabrication, and fitting in both estimates. The ranges overlap, so the slab you choose matters more than the material name alone.  If you’re open to either surface, ask for two prices using the same layout, edge, sink, and removal scope. Compare a granite and a quartz option you’d actually choose. You can browse 3A’s Quartz Countertops collection before requesting both prices.

FAQs

Can I replace my countertops without replacing the cabinets?

Yes, if your existing cabinets are sound, level, and able to support the new stone. Have the installer inspect the cabinet boxes and planned overhangs before finalizing the quote. Ask who handles any leveling or reinforcement that comes up during the inspection.

Do I have to pay for an entire granite slab?

It depends on the fabricator and the layout. Some quotes are based on finished countertop area, while others reflect the number of slabs the job requires. Ask whether an island or a specific seam placement would require a second slab, and whether you can use leftover material for a vanity or backsplash.

Is there a minimum charge for a small granite job?

Some installers apply a minimum charge or require a certain square footage for advertised remnant pricing. For a small vanity or laundry-room counter, request a complete price that includes fabrication, edge finishing, the sink cutout, and installation. 

Does a sink cutout include sink installation and plumbing?

Ask the installer to list cutout, sink mounting, and plumbing reconnect separately. The cutout is the opening in the stone. Mounting attaches the sink, and plumbing reconnect restores the faucet, drain, and other connections. Your quote should show who handles each step. 

Is initial sealing included in granite installation?

Inclusion varies by provider. Ask whether the crew applies the first sealer and what care it recommends for the slab you choose. Put the initial sealing scope in the written estimate so you can compare bids on the same basis. 

Conclusion:

For a free estimate from 3A Cabinets and Countertops, send your approximate dimensions, photos of the current layout, preferred granite colors, and the type of sink or cooktop you plan to use. Include any island, waterfall edge, backsplash, or countertop removal you’d like priced. Those details help the team understand your project and identify what needs to be confirmed during measurement.


 
 
 

Comments


3acabinetscountertops logo

Welcome to 3ACabinetsCountertops.

​We specialize in high-quality cabinet installation, premium quartz and granite countertops, and full-service bathroom remodeling for homeowners who value lasting craftsmanship and refined design. 

Address:

5519 Old Greenhouse Rd,

Houston Tx 77084​

​

Phone: (832)583-5678

bottom of page